Diamonds in frames

Diamonds in frames - the tool for dressing grinding wheels with internal and external round, flat, бесцентровом grinding, as well as in the зубошлифовании, шлицевании and other operations finishing processing shaped surfaces.

Diamonds in frames is edit grinding circles all the characteristics that are used in the metal industry in the final grinding in operations, the performance that is achieved by the roughness of the machined surfaces details of Ra no less than 0.2 microns (grinding plunge), and 0.1 micron (grinding with traverse). In this, the top of the diamond should be on 1-2 mm below the center line. 

In the process of operation of the instrument should be periodically rotated around its axis by 90⁰.  the Limiting value of the site depreciation 1 mm².

Diamonds in frames are manufactured with the angle of the holder of 90⁰ (for editing circles shaped profile) and 120⁰ (for editing circles direct profile).

Quality used diamonds:

• 1-e is not less than 4 working peaks;
• 2-e is not less than 3 working peaks;
• 3-e is not less than 2 working tops.

the Choice of the multiplicity of the diamond is dependent on the size of the grinding wheel and is determined by reference table.